Spreader Settings - Randy Lemmon (2024)

If you’ve ever consulted the spreader settings on a bag of fertilizer, you’ve no doubt discovered your spreader isn’t listed.

Heck, most of those spreaders don’t even exist anymore. The spreader manufacturers keep advancing their products every year or two, but the fertilizer manufacturers never update their information, much less do new research to verify dosage changes.

So, with help from various fertilizer experts over the years, I’ve come up with some practical spreader-setting rules that seem to work very well.

First, I don’t really have a preference on spreaders. Just be sure to use abroadcastspreader like the one pictured… not a drop spreader. Many northern transplants accustomed to growing Kentucky Bluegrass and Fescues may still own drop spreaders. If you’ve got one, you might as well get rid of it.

In Houston, you’ll need a broadcast spreader since St. Augustine is the predominant grass. Using a drop spreader on it will just “streak” it. Plus, using a broadcast spreader will save you gobs of time, cutting your passes by more than half.

So here are the general rules:

Forfertilizersput the setting a notch or two above half. For example, if there are 20 notches on the spreader, 11-12 would be the setting. You don’t have to cover every square inch of turf to get good results, so if you think that’s too much, drop to a notch below half. With hand-held spreaders, if there are 5 or fewer settings open it all the way. If a hand-held spreader has 10 or more settings, put the setting a notch or two above half.

Forpre-emergent herbicides, put the setting on or a notch above one quarter. (If there are 20 notches, 5-6 would be the setting.) On hand-held spreaders, if there are 5 or fewer settings lower the setting to 3, or even 2. If a hand-held spreader has 10 or more settings, put the setting on or a notch above one quarter. If your gut tells you the dosage is not enough … you don’t think it’s covering the zone that needs to be covered … then up it a notch or two.

With the advancements inspreadable composts, you can use a broadcast spreader open full.

Don’t overthink the math on this. I’ve seen spreaders with as few as 10 settings and as many as 30. You can be off by a notch or two without fear of over doing it.

Spreader Settings - Randy Lemmon (2024)

FAQs

What are the suggested spreader settings? ›

So here are the general rules: For fertilizers put the setting a notch or two above half. For example, if there are 20 notches on the spreader, 11-12 would be the setting. You don't have to cover every square inch of turf to get good results, so if you think that's too much, drop to a notch below half.

What fertilizer does Randy Lemmon use? ›

Nitro-Phos Sweet Green is endorsed by Houston's lawn and garden authority Randy Lemmon. Randy hosts the GardenLine radio program every Saturday and Sunday 6am - 10am.

What are the numbers on a spreader? ›

Application Rate: The numbers on a broadcast spreader represent the application rate, which is typically measured in pounds per 1,000 square feet (lbs/1000 sq ft) [1]. Different materials, such as fertilizers or seeds, have specific recommended application rates to achieve optimal results.

What setting should I use on my Scotts spreader? ›

Lawn Seed Spreader Settings for Grass Seed:
Spreader ModelOverseeding (35g per m2)Sowing a new lawn (50g per m2)
Scotts EasyGreen RotarySetting 27, 1 passSetting 31.5, 1 pass
Scotts Evergreen Easy Spreader+Setting 5, 1 passSetting 4, 1 pass
Westland Hand Spreader(2) Medium Application(3) Heavy Application
8 more rows

How to calculate spreader settings? ›

Generic Spreader Settings
  1. Divide 100 by the square foot the bag of fertilizer covers.
  2. Multiply the weight of the bag by this number.
  3. The answer is the amount of fertilizer needed to cover 100 sq. ft.
  4. Place this amount in the spreader.
  5. Mark off a 10 ft. x 10 ft. area.
  6. Apply using the suggested setting.

Are Scotts spreader settings lbs per 1000 sq ft? ›

per 5000 sq. ft. or 8 lbs per 1000 sq ft.

What is the best fertilizer for stressed grass? ›

Scotts® TurfBuilder® UltraFeed™is an excellent choice for fertilizing lawns that tend to get stressed in the summer. It holds onto nutrients until your lawn needs them, then releases them. Because of this, a single feeding can last up to 6 months.

What fertilizer does lawn doctor use? ›

Enriched Fertilizers. Lawn Doctor technicians use nutrient-enriched materials that are packed with vital nutrients like nitrogen, phosphorus, potassium and micro-nutrients. Slow-Release Fertilization. Our fertilizers slow-release nutrients to ensure your lawn is sustained for weeks after treatment.

What is the spreader rate for 10 10 10? ›

DIRECTIONS FOR USE

3.6 lbs/1,000 sq. ft.

How do I choose a fertilizer spreader? ›

Choose a hand spreader for small areas and a push or tow-behind spreader for medium and large lawns. If you're new to lawn care you might find it easiest to use a drop spreader to reduce the risk of overapplication.

What is the best setting for a spreader? ›

Recommended Grass Seed Spreader Settings
  • Tuff Play Overseeding (4 lbs. per 1,000 sq. ...
  • Tuff Play New Lawn Seeding (8 lbs. per 1,000 sq. ...
  • MGC Shady Overseeding (2 lbs. per 1,000 sq. ...
  • MGC Shady New Lawn Seeding (4 lbs. per 1,000 sq. ...
  • MGC Sunny Overseeding (1.5 lbs. per 1000 sq. ...
  • MGC Sunny New Lawn Seeding (3 lbs. per 1000 sq.

Are all spreader settings the same? ›

Recommended spreader settings are usually listed on the product package. Different types and models of spreaders apply granular lawn fertilizers and pest control products at different rates. This is a function of spreader design as well as the granule size and consistency of the product you are applying.

What spreader settings for 12-12-12 fertilizer? ›

12-12-12 Fertilizer
SpreaderSetting
Wards6.5
Cyclone4
Central Drop10
Central Broadcast4.5
4 more rows

How much 10-10-10 fertilizer per square foot? ›

and you plan to use a 10-10-10 fertilizer, then this is how to figure how much fertilizer to use to supply 0.25 lb. of nitrogen. 0.25 (lbs of nitrogen from recommendations) divided by 0.10 (10% nitrogen in fertilizer) = 2.5 lbs of 10-10-10 fertilizer to supply 0.25 lb nitrogen per 100 sq. ft.

Top Articles
Latest Posts
Article information

Author: Trent Wehner

Last Updated:

Views: 5868

Rating: 4.6 / 5 (56 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Trent Wehner

Birthday: 1993-03-14

Address: 872 Kevin Squares, New Codyville, AK 01785-0416

Phone: +18698800304764

Job: Senior Farming Developer

Hobby: Paintball, Calligraphy, Hunting, Flying disc, Lapidary, Rafting, Inline skating

Introduction: My name is Trent Wehner, I am a talented, brainy, zealous, light, funny, gleaming, attractive person who loves writing and wants to share my knowledge and understanding with you.